/*
 * Web Server
 *
 * A simple web server that shows the value of the analog input pins.
 */

#include <Ethernet.h>

byte mac[] = { 
  0xEE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
byte ip[] = { 
  10, 1, 1, 124 };

Server server(80);

void setup()
{
  Ethernet.begin(mac, ip);
  server.begin();
  Serial.begin(9600);
}

void loop()
{
  Client client = server.available();
  if (client) {
    // an http request ends with a blank line
    boolean current_line_is_blank = true;
    while (client.connected()) {
      if (client.available()) {
        char c = client.read();
        Serial.print(c);
        // if we've gotten to the end of the line (received a newline
        // character) and the line is blank, the http request has ended,
        // so we can send a reply
        if (c == '\n' && current_line_is_blank) {
          // send a standard http response header
          client.println("HTTP/1.1 200 OK");
          client.println("Content-Type: text/html");
          client.println();

          // output the value of each analog input pin
          client.print("[");
          for (int i = 0; i < 6; i++) {
            client.print(analogRead(i));
            client.print(",");
          }
          client.println("]");
          break;
        }
        if (c == '\n') {
          // we're starting a new line
          current_line_is_blank = true;
        } 
        else if (c != '\r') {
          // we've gotten a character on the current line
          current_line_is_blank = false;
        }
      }
    }
    client.stop();
  }
}